ವಿಷಯಕ್ಕೆ ಹೋಗು

ಟೆಂಪ್ಲೇಟ್:Infobox Australian place/doc

ವಿಕಿಪೀಡಿಯ, ಒಂಜಿ ಸೊತಂತ್ರ ವಿಶ್ವಕೋಶ

ಟೆಂಪ್ಲೇಟ್:Uses infobox settlement ಟೆಂಪ್ಲೇಟ್:Infobox Australian place/pagelinks

{{Infobox Australian place}} is used to add infoboxes to articles on places in Australian states and territories. It is not limited to populated places such as cities, towns and suburbs, but may be used on any place including regions, local government areas, cadastral units and even some areas that do not fall into any of the preceding descriptions and for which no other infobox is appropriate. It is the standard infobox used in Australian articles. Australian articles using {{Infobox settlement}} should be converted to use this infobox.

The infobox has been extensively customised for Australia and includes automation that results in some parameters being redundant to other parameters. For example, if population density (in the |density= parameter) is not specified, this will be automatically generated based on the |pop= and |area= parameters. It is therefore important to read parameter descriptions thoroughly, to avoid unnecessarily providing redundant or incorrect information.

For infoboxes that require reformatting, general cleanup or addition of missing parameters, Template:Infobox Australian place/cleanup can be substituted. This will reformat the infobox and remove invalid parameters.

To use this template

[ಸಂಪೊಲಿಪುಲೆ]
  1. Copy the relevant blank template from the Blank infobox page into the beginning of your document, remembering to put the code on the line directly before the start of the article's lead.
  2. Enter values for the parameters as outlined under § Parameters, particularly |type= and |state=. Parameters left blank will automatically be hidden.
  3. Preview the page with your edits.
  4. Save the page with an appropriate edit summary (e.g., "Added {{[[Template:Infobox Australian place|Infobox Australian place]]}}", which will display as, "Added {{Infobox Australian place}}" ).

Both type and state are required parameters.

All other parameters used by this template are optional.

Because the template wraps {{Infobox settlement}}, please consult the documentation there for other optional parameters.

These parameters must be set for every infobox as they affect the behaviour of many other parameters.

The |type= parameter sets up the template for a specific type of location. It regulates which parameters can be used and sets the colour of the top bar of the infobox. The entered values for this parameter should be plain, unlinked text.

Use of the |type= parameter
Accepted value Description
city A city.
suburb A suburb, a form of administrative region generally used in cities and towns.
town A town or other settlement.
lga An Australian local government area (LGA) - a particular form of administrative region, used to create local governments. Many LGAs will use terms such as "Town of", "District Council of", "Shire of", "City of", etc., in their names.

Note that the ACT does not have any system of local government, and therefore does not have LGAs.

region
cadastral
other
undefined Occurs when the parameter has been left blank.

    The |state= parameter defines the state or territory of the infobox's location. It sets up the template to refer to and link to the correct state or territory throughout. The entered values for this parameter should be plain, unlinked text; for consistency, lower case is preferred. If the parameter is left blank, the infobox will default to au (i.e., Australia).

    Use of the |state= parameter
    Accepted value State or territory
    act Australian Capital Territory (ACT)
    nsw New South Wales (NSW)
    nt Northern Territory (NT)
    qld Queensland (Qld or QLD)
    sa South Australia (SA)
    tas Tasmania (Tas or TAS)
    vic Victoria (Vic or VIC)
    wa Western Australia (WA)
    jbt Jervis Bay Territory (JBT)
    ni Norfolk Island (NI)
    au Australia - use when no other value is applicable.
    Optional parameters
    Parameter Available for |type= Description Notes Potential sources Values
    name all Name of infobox's place If not present or blank, the infobox title will not be shown. If specified, will be used as the text for the URL, and in the table of nearest neighbours. Plain text.
    native_name all Placename in local Indigenous Australian language(s) Name of a place in the local Aboriginal or Torres Strait Islander language, if different from name.

    Native is a deprecated archaic term in the Australian context, but is used in this template for consistency with other templates. Please don't use the term in articles.

    plain text, or use {{nativename}}.

    Add <ref></ref> with a citation where possible.

    native_name_lang all ISO 639-1 code, e.g. nys for Noongar, for the Indigenous Australian language, if available If there are names in multiple Indigenous Australian languages, enter those names into the |native_name= parameter using {{lang}} instead.ಟೆಂಪ್ಲೇಟ್:PbNative is a deprecated archaic term in the Australian context, but is used in this template for consistency with other templates. Please don't use the term in articles.ಟೆಂಪ್ಲೇಟ್:PbPrerequisite parameters:
    • native_name
    plain text
    city ??ಟೆಂಪ್ಲೇಟ್:Pb(recommended for suburb) City name Name will be auto-linked if no wikilink is defined.ಟೆಂಪ್ಲೇಟ್:PbIn some cases it may be desirable to include the name of a non-city here. List of cities in Australia plain text, may be linked.
    image all Image of the locality For cadastral units, this is typically a map showing its location within the state or territory. filename
    image_upright all Width of image of the locality (in relation to default thumbnail size) The size should not be set to a value that would result in an image width greater than 300px. See help below for guidance on determining the value to be used, and WP:IMGSIZE for rationale. Unformatted number. If not specified, the image width defaults to 1.23, which is approximately 270px for readers that haven't changed their default thumbnail size at Special:Preferences.
    caption all Caption for the locality image wikitext (can contain links)
    image_alt all for the image wikitext (can contain links)
    coordinates ??ಟೆಂಪ್ಲೇಟ್:Pb(recommended for all) Displays coordinates of the locality. Triggers a map to automatically generate (can be adjusted in various ways). ಟೆಂಪ್ಲೇಟ್:UF-coord

    The automatic map will be of the state, with a pushpin identifying the position specified in {{coord}}. Parameters to adjust or toggle the map are under § Location map generated by coordinates. A second map can be generated using wikidata as well (see § Location map generated by wikidata).

    Example:
    {{Coord|32|45|41.3|S|151|44|38.6|E|type:city_region:AU-NSW|display=inline,title}}
    coord_ref Recommended for all Footnote demonstrating the coordinates value Prerequisite parameters:
    • coordinates
    wikitext (can contain links)ಟೆಂಪ್ಲೇಟ್:PbBest when used with <ref></ref> tags and a citation template
    pop Recommended for all Population statistic (use approximate if |type=region) If left empty, population data will be displayed from Wikidata (for appropriate geography). See Notes below for more information. ABS (generic)
    2016 Census QuickStats
    Number. should be plain, either with or without a comma. i.e. 12345 or 12,345

    Do not add anything else, including years or references.

    pop_year Recommended for all Year applicable to the population figure Prerequisite parameters:
    • pop
    ABS (generic)
    2016 Census QuickStats
    Number. When the population is for a census year, use {{CensusAU}}
    pop_footnotes Recommended for all Footnote demonstrating the population statistic Prerequisite parameters:
    • pop
    ABS (generic)
    2016 Census QuickStats
    wikitext (can contain links)ಟೆಂಪ್ಲೇಟ್:PbBest when used with <ref></ref> tags and {{Census 2016 AUS}}
    pop2 Recommended for all Second population statistic (use approximate if |type=region) See Clarence Town, New South Wales for an example of when a second population figure is useful.ಟೆಂಪ್ಲೇಟ್:PbPrerequisite parameters:
    • pop
    ABS (generic)
    2016 Census QuickStats
    Number. Should be unformatted, and can be with or without a comma. i.e. 12345 or 12,345

    Do not add anything else, including years or references.

    pop2_year Recommended for all Year applicable to the second population figure Prerequisite parameters:
    • pop2
    ABS (generic)
    2016 Census QuickStats
    Number. When the population is for a census year, use {{CensusAU}}
    pop2_footnotes Recommended for all Footnote demonstrating the second population statistic Prerequisite parameters:
    • pop2
    ABS (generic)
    2016 Census QuickStats
    wikitext (can contain links)ಟೆಂಪ್ಲೇಟ್:PbBest when used with <ref></ref> tags and {{Census 2016 AUS}}
    poprank ??ಟೆಂಪ್ಲೇಟ್:Pb(recommended for city) population rank within Australia Prerequisite parameters:
    • pop
    List of cities in Australia by population Use eg: '1st', '15th'
    density allಟೆಂಪ್ಲೇಟ್:Pb(recommended for city, region) population density Will auto-calculate if both pop and area are defined ABS unformatted number, in people/km²
    density_footnotes allಟೆಂಪ್ಲೇಟ್:Pb(recommended for city, region) population density footnote for references ABS wikitext (can contain links)ಟೆಂಪ್ಲೇಟ್:PbBest when used with <ref></ref> tags and a citation template
    established all Date the location was established Options include:
    • An exact date (using {{start date}} is suggested)
    • a year, eg: 1894
    • a decade, eg: 1890s
    established_footnotes all Reference demonstrating the establishment date wikitext (can contain links)ಟೆಂಪ್ಲೇಟ್:PbBest when used with <ref> </ref> tags and a citation template
    abolished all Date the location was abolished If the exact date is unknown, a year will suffice date
    gazetted all Date the place name was gazetted date
    postcode allಟೆಂಪ್ಲೇಟ್:Pb(recommended for suburb, town) Postcode(s) for the place Australia Post postcode search tool number
    elevation allಟೆಂಪ್ಲೇಟ್:Pb(recommended for suburb, town) The elevation, measured from sea level in metres unformatted number in metres
    elevation_footnotes allಟೆಂಪ್ಲೇಟ್:Pb(recommended for suburb, town) Footnote demonstrating the elevation wikitext (can contain links)ಟೆಂಪ್ಲೇಟ್:PbBest when used with <ref> </ref> tags and a citation template
    area all The area of the location ABS RAW unformatted number in km2 (ex: "1234.5" NOT "1234.5 km2")
    area_footnotes all Footnote demonstrating the area ABS wikitext (can contain links)ಟೆಂಪ್ಲೇಟ್:PbBest when used with <ref> </ref> tags and a citation template
    timezone allಟೆಂಪ್ಲೇಟ್:Pb(recommended for city, suburb, town, lga, region) Timezone of the location Time in Australia Plain text, linked. Either the full name or the abbreviation can be used (e.g., either [[Australian Western Standard Time]] or [[Australian Western Standard Time|AWST]] can be used).
    The utc parameter must also be set.
    utc allಟೆಂಪ್ಲೇಟ್:Pb(recommended for city, suburb, town, lga, region) UTC offset of the timezone The standard values are:
    • for WA +8:00
    • for SA & NT +9:30
    • for QLD, NSW, Vic. & Tas. +10:00
    "+" followed by number, e.g., +8:00 (for AWST)
    timezone-dst allಟೆಂಪ್ಲೇಟ್:Pb(recommended for city, suburb, town, lga, region) Daylight saving timezone (where applied) Daylight saving time in Australia Plain text, linked. Either the full name or the abbreviation can be used (e.g., either [[Australian Eastern Daylight Time]] or [[Australian Eastern Daylight Time|AEDT]] can be used).
    The utc-dst parameter must also be set.
    utc-dst allಟೆಂಪ್ಲೇಟ್:Pb(recommended for city, suburb, town, lga, region) UTC offset of the daylight saving timezone The standard values are:
    • for SA +10:30
    • for NSW, Vic. & Tas. +11:00
    "+" followed by number, e.g., +11:00 (for AEDT)
    mayor lga Mayor of the LGA Name of the mayor only. Do not include titles, postnominals or political party information. Plain text
    mayortitle lga Title of the mayor Wikitext (can be wikilinked), or blank.

    If left blank, will default to "Mayor".

    location# (up to location5) allಟೆಂಪ್ಲೇಟ್:Pb(recommended for city, suburb, town) Specified location(s) to display the distance and direction from Normally other cities or population centres.ಟೆಂಪ್ಲೇಟ್:PbSee § Notes below Maps such as Google Earth Plain text, may be wikilinked. If no wikilink is given, the text will be automatically wikilinked.
    dist# (up to dist5) allಟೆಂಪ್ಲೇಟ್:Pb(recommended for city, suburb, town) The distance by road (not direct) from the specified location(s) Distance by road, not direct.ಟೆಂಪ್ಲೇಟ್:PbSee § Notes below Maps such as Google earth, whereis, Visit Victoria route planner unformatted number in km
    dir# (up to dir5) allಟೆಂಪ್ಲೇಟ್:Pb(recommended for city, suburb, town) The direction (preferably cardinal) from the specified location(s), normally other cities or population centres See § Notes below Plain text. Normally a cardinal direction, either as an initialism (e.g. N, SE, NNW) or the word in lower case (per ; e.g., north, south-east, north-north-west).
    lga allಟೆಂಪ್ಲೇಟ್:Pb(recommended for city, suburb, town) Name of the local government area This parameter will display in a way that makes little sense when |type=lga, but it can be used if necessary. NSW Geographical Names Board Plain text, may be wikilinked. If no wikilink is given, the text will be automatically wikilinked.
    lga2ಟೆಂಪ್ಲೇಟ್:Pblga3ಟೆಂಪ್ಲೇಟ್:Pblga4ಟೆಂಪ್ಲೇಟ್:Pblga5 allಟೆಂಪ್ಲೇಟ್:Pb(recommended for city, suburb, town) Names of additional LGAs This parameter displays in a way that makes no sense when |type=lga, but it can be used if necessary.

    If more than 5 LGAs are required, use {{plainlist}} as necessary. See Hunter Region for an example.

    Plain text, can be wikilinked. If no wikilink is given, the text will be automatically wikilinked.
    seat allಟೆಂಪ್ಲೇಟ್:Pb(recommended for lga) Council seat of the LGA Plain text, can be wikilinked. If no wikilink is given, the text will be automatically wikilinked.
    region allಟೆಂಪ್ಲೇಟ್:Pb(recommended for city, suburb, town, lga, cadastral) Name of region location is in Plain text, can be wikilinked. If no wikilink is given, the text will be automatically wikilinked.
    county allಟೆಂಪ್ಲೇಟ್:Pb(recommended for city, suburb, town, lga) Name of the county (a type of lands administrative division) Not used in all areas. NSW Geographical Names Board Plain text, can be wikilinked. If no wikilink is given, the text will be automatically wikilinked.
    parish allಟೆಂಪ್ಲೇಟ್:Pb(recommended for city, suburb, town) Name of the parish (a type of lands administrative division) Only used in NSW, Qld and Vic. NSW Geographical Names Board Plain text, can be wikilinked.
    hundred cadastral Name of the hundred (a type of lands administrative division) Not used in all areas. Plain text, can be wikilinked.
    former_hundred cadastral Former name of the hundred (a type of lands administrative division) Not used in all areas. Plain text, can be wikilinked.
    division cadastral Name of the division (a type of lands administrative division) Only used in NSW - lands administrative divisions of New South Wales Plain text, can be wikilinked.
    stategovಟೆಂಪ್ಲೇಟ್:Pbstategov2ಟೆಂಪ್ಲೇಟ್:Pbstategov3ಟೆಂಪ್ಲೇಟ್:Pbstategov4ಟೆಂಪ್ಲೇಟ್:Pbstategov5ಟೆಂಪ್ಲೇಟ್:Pb allಟೆಂಪ್ಲೇಟ್:Pb(recommended for city, suburb, town, lga, region) The place's state government electorate(s) Plain text, can be wikilinked.
    fedgovಟೆಂಪ್ಲೇಟ್:Pbfedgov2ಟೆಂಪ್ಲೇಟ್:Pbfedgov3ಟೆಂಪ್ಲೇಟ್:Pbfedgov4ಟೆಂಪ್ಲೇಟ್:Pb allಟೆಂಪ್ಲೇಟ್:Pb(recommended for city, suburb, town, lga, region) The place's federal government electorate(s) Plain text, can be wikilinked.
    logo allಟೆಂಪ್ಲೇಟ್:Pb(recommended for lga) Logo of place For LGAs, these can be sourced from individual LGA websites. Image link (do not include "File:" or "Image:")
    logo_upright allಟೆಂಪ್ಲೇಟ್:Pb(recommended for lga) Width of logo (in relation to default thumbnail size) The size should not be set to a value that would result in an logo width greater than 300px. See help below for guidance on determining the value to be used, and WP:IMGSIZE for rationale. Unformatted number. If not specified, the logo width defaults to 1.23, which is approximately 270px for readers that haven't changed their default thumbnail size at Special:Preferences.
    logo_alt allಟೆಂಪ್ಲೇಟ್:Pb(recommended for lga) for the logo Wikitext, can be wikilinked.
    url allಟೆಂಪ್ಲೇಟ್:Pb(recommended for lga) URL for the location's individual website Do not use for former LGAs Bare url, e.g., http://www.example.com
    maxtemp allಟೆಂಪ್ಲೇಟ್:Pb(recommended for suburb, town) Maximum average annual temperature Bureau of Meteorology's climate data unformatted number, in °C
    maxtemp_footnotes allಟೆಂಪ್ಲೇಟ್:Pb(recommended for suburb, town) Footnote demonstrating the maximum temperature Bureau of Meteorology's climate data Wikitext, can contain templates, html, wikilinks, external links, etc.ಟೆಂಪ್ಲೇಟ್:PbBest when used with <ref> </ref> tags and a citation template
    mintemp allಟೆಂಪ್ಲೇಟ್:Pb(recommended for suburb, town) Minimum average annual temperature Bureau of Meteorology's climate data unformatted number, in °C
    mintemp_footnotes allಟೆಂಪ್ಲೇಟ್:Pb(recommended for suburb, town) Footnote demonstrating the minimum temperature Bureau of Meteorology's climate data wikitext (can contain links)ಟೆಂಪ್ಲೇಟ್:PbBest when used with <ref> </ref> tags and a citation template
    rainfall allಟೆಂಪ್ಲೇಟ್:Pb(recommended for suburb, town) Average annual rainfall Bureau of Meteorology's climate data unformatted number, in mm
    rainfall_footnotes allಟೆಂಪ್ಲೇಟ್:Pb(recommended for suburb, town) Footnote demonstrating the annual rainfall Bureau of Meteorology's climate data wikitext (can contain links)ಟೆಂಪ್ಲೇಟ್:PbBest when used with <ref> </ref> tags and a citation template
    near-nwಟೆಂಪ್ಲೇಟ್:Pbnear-nಟೆಂಪ್ಲೇಟ್:Pbnear-neಟೆಂಪ್ಲೇಟ್:Pbnear-wಟೆಂಪ್ಲೇಟ್:Pbnear-eಟೆಂಪ್ಲೇಟ್:Pbnear-swಟೆಂಪ್ಲೇಟ್:Pbnear-sಟೆಂಪ್ಲೇಟ್:Pbnear-se allಟೆಂಪ್ಲೇಟ್:Pb(recommended for suburb, lga) Neighbours which share borders with the infobox's location It is best when all listed neighbours are of the same type (e.g., suburbs around a suburb). When the place of a neighbour is instead taken by something like an ocean or another state/territory, include it in italics. Plain text, linked. Can be formatted.

    For example, the LGA of the City of Melville has a neighbour to its east, the City of Canning. Canning would be entered as |near-e=[[City of Canning]] (or [[City of Canning|Canning]], to save space). The City of Melville is also neighboured at its north by the Swan River (Western Australia). This would be entered as |near-n=''[[Swan River (Western Australia)|Swan River]]'' (in italics as it is not another LGA)

    near allಟೆಂಪ್ಲೇಟ್:Pb(recommended for suburb, lga) Central to neighbours Replaces name in centre of table of near-* values. (Can also be used without any near-* e.g. to specify a section link to the main text for further info.) plain text, link (ideally to a section of the article with further information)
    footnotes all General footnotes, used to provide footnotes supporting information in parameters without a dedicated parameter for footnotes. wikitext (can contain links)ಟೆಂಪ್ಲೇಟ್:PbBest when used with <ref> </ref> tags.
    _noautocat all Prevents automatic categorisation This should only be used when absolutely necessary, when the automatic categorisation built into this template causes errors. A hidden note should be included to explain why the parameter is being used in the article. "yes" to not categorise

    leave blank to categorise

    Location map generated by coordinates

    [ಸಂಪೊಲಿಪುಲೆ]

    The recommended and most common location map is auto-generated by |coordinates=, but can be toggled off using |map_type=nomap (see in table). All of the following parameters require |coordinates= to be properly set using {{coord}}.

    {{coord}}-generated map
    Parameter Available for |type= Description Notes Values
    coordinates See § coordinates for details
    map_alt all for the location map Prerequisite parameters:
    • coordinates
    wikitext (can contain links)
    map_type all Toggles whether a location map is automatically generated Prerequisite parameters:
    • coordinates
    Available options are:
    • nomap to suppress automatically generated location map
    • auto or leave it blank, to allow the automatically generated location map
    force_national_map allಟೆಂಪ್ಲೇಟ್:Pb(recommended for city, region) Forces location map to use a map of Australia as a whole Prerequisite parameters:
    • coordinates
    yes to force map of Australia, or leave blank. Plain text, do not link
    use_lga_map allಟೆಂಪ್ಲೇಟ್:Pb(recommended for suburb, lga) Forces location map to use the LGA's map which is available to Module:Location map First confirm whether there is a map for that LGA - see Category:Australia location map modules.ಟೆಂಪ್ಲೇಟ್:PbPrerequisite parameters:
    • coordinates
    • state
    • lga
    yes to force map of the LGA, or leave blank
    alternative_location_map all Forces the location map to use an alternative map available to Module:Location map It can be used to display an LGA map in infoboxes where |lga= cannot be set.ಟೆಂಪ್ಲೇಟ್:PbPrerequisite parameters:
    • coordinates
    Name of the alternative map (Category:Australia location map modules includes all available maps)
    relief all Forces relief-style map, if available Prerequisite parameters:
    • coordinates
    yes to force relief-style map, or leave blank
    pushpin_map_caption all Caption for the location map Prerequisite parameters:
    • coordinates
    Plain text or wikitext
    pushpin_label_position all Position of the pushpin's caption, in relation to the pushpin Prerequisite parameters:
    • coordinates
    left, right, top, bottomಟೆಂಪ್ಲೇಟ್:PbIf this is not set, the default is left

    A second map can be generated by {{Infobox mapframe}}. This map can also function when there are no local |coordinates=, by using those defined at Wikidata. It will display below the § Location map generated by coordinates map.

    Wikidata can have a OpenStreetMap relation ID (P402) property or a geoshape property attached, allowing this map to show the shape of the local area, in the map thumbnail as well as in the expanded view available after clicking the thumbnail.

    Note: if the resulting map is incorrect in any way, especially if it's just a light-blue square, the likely cause is problems with the OpenStreetMap data. See Module talk:Mapframe/FAQ question 4.

    Mapframe map
    Parameter Available for |type= Description Notes Values
    local_map all Enable map of local area This map will display below the map generated by |coordinates= if that map is also present. yes will display the map
    zoom all Change zoom size of local_map For more information, see {{Infobox mapframe}} instructions.ಟೆಂಪ್ಲೇಟ್:PbPrerequisite parameters:
    • local_map
    Numeric value between 1 and 18. If left blank, zoom size defaults to 10.
    local_map_id allಟೆಂಪ್ಲೇಟ್:Pb(recommended for other) Wikidata ID for the location, if the infobox is on an article that does not connect to the location's wikidata entry Search Wikidata for an IDಟೆಂಪ್ಲೇಟ್:PbPrerequisite parameters:
    • local_map
    An unlinked wikidata ID, e.g. Q595259 for Raymond Terrace. The ID will begin with "Q".
    local_map_caption all Optional caption for the local area map Prerequisite parameters:
    • local_map
    Plain text or wikitext

    For a complete list of available mapframe parameters, please see {{Infobox settlement#Mapframe maps}}.

    Wrapped parameters

    [ಸಂಪೊಲಿಪುಲೆ]

    The template wraps {{Infobox settlement}} using {{Template wrapper}}. For a full list of parameters passed through _alias-map, _reuse, _exclude etc, please see the source.

    And conversely, for any other parameters from Infobox settlement, please consult the documentation there.

    Calculating "image_upright"

    [ಸಂಪೊಲಿಪುಲೆ]

    The |image_upright= parameter, and |image2_upright= and |logo_upright= where applicable, are provided so as to facilitate the use of scalable images in this infobox, in accordance with the instructions at WP:IMAGESIZE, which advises against the use of "px" (for example: thumb|300px), as this forces a fixed image width.

    Scalable images respect the user's base preference, which may have been selected for that user's particular devices. Module:InfoboxImage, which is used in this infobox, accommodates the use of scaling. However, setting the appropriate scale is slightly more complex than setting a raw "px" value. This guide provides a quick conversion table to make the process of setting a scale easier. It is based on a default thumbnail setting of 220px.

    • 170pxupright=0.75
    • 180pxupright=0.8
    • 190pxupright=0.85
    • 200pxupright=0.9
    • 210pxupright=0.95
    • 220pxupright=1
    • 230pxupright=1.05
    • 240pxupright=1.1
    • 250pxupright=1.15
    • 260pxupright=1.2
    • 270pxupright=1.23
    • 280pxupright=1.25
    • 290pxupright=1.3
    • 300pxupright=1.35

    Footnote and reference parameters

    [ಸಂಪೊಲಿಪುಲೆ]

    Any references to support a parameter reserved solely for a numeric value should be placed within the respective |..._footnotes= or |..._ref= parameters. For example, place the reference used for the area of City X in the |area_footnotes= parameters and not in the |area= parameter. Otherwise, an error may result.

    Unformatted numbers and expression errors

    [ಸಂಪೊಲಿಪುಲೆ]

    Certain parameters require numeric values to be entered in an unformatted/raw fashion—i.e. 1000.0 not 1,000.0. If an expression error is present, simply remove any commas or spaces from the number.

    Dist#, Dir# and Location#

    [ಸಂಪೊಲಿಪುಲೆ]

    This is the distance and approximate direction from another location. The '#' is replaced with a number between 1 and 5. Therefore, five locations can be listed, using |location1= through |location5=. The distances can be listed using |dist1= through |dist5=. Direction from the locations is optional, and can be specified using |dir1= through |dir5=.

    Population from Wikidata

    [ಸಂಪೊಲಿಪುಲೆ]

    If the |pop= parameter is left empty or not supplied, the template will attempt to retrieve population data from Wikidata. For more information, see the documentation of Module:PopulationFromWikidata. This is a new feature as of June 2022 (to coincide with the release of the 2021 Australian Census data). Please report any feedback to Template talk:Infobox Australian place.

    Where to find information

    [ಸಂಪೊಲಿಪುಲೆ]

    Tracking categories

    [ಸಂಪೊಲಿಪುಲೆ]

    Deprecated parameters

    [ಸಂಪೊಲಿಪುಲೆ]
    Template:Infobox Australian place
    Template:Infobox Australian place/Blank
    Template:Infobox Australian place/Examples
    Template:Infobox Australian place/doc
    Template:Infobox Australian place/sandbox
    Template:Infobox Australian place/sandbox/doc
    Template:Infobox Australian place/testcases

    The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

    If the place or venue has "established", "founded", "opened" or similar dates, use {{start date}} for the earliest of those dates unless the date is before 1583 CE.

    If it has a URL, use {{URL}}.

    Please do not remove instances of these sub-templates.

    hCard uses HTML classes including:

    • adr
    • agent
    • category
    • county-name
    • extended-address
    • fn
    • label
    • locality
    • nickname
    • note
    • org
    • region
    • street-address
    • uid
    • url
    • vcard

    Geo is produced by calling {{coord}}, and uses HTML classes:

    • geo
    • latitude
    • longitude

    Please do not rename or remove these classes nor collapse nested elements which use them.

    When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter.