ಟೆಂಪ್ಲೇಟ್:Infobox dam

Template documentation[view] [edit] [history] [purge]

Usage

Use the following infobox for all types of hydroelectric power stations involving dams, including pumped-storage. For all types of wave and tidal power stations, as well as all other types of power stations, please use {{Infobox power station}}.

{{{name}}}
{{{image_caption}}}
ಪುದರ್	{{{name_official}}}
ದೇಸೊ	{{{country}}}
ಜಾಗೆ	{{{location}}}
Coordinates	0°N 0°E / 0; 0
ಕಟ್ಟ್‌ದಿನ ಉದ್ದೇಸೊ	{{{purpose}}}
ಸ್ಥಿತಿ	{{{status}}}
ಕಟ್ಟರೆ ಸುರು ಮಲ್ತಿನಿ	{{{construction_began}}}
ಉದೀಪನ ಆಯಿನಿ	{{{opening}}}
ದರ್ತ್‍ದಿನ	{{{demolished}}}
ಖರ್ಚಿ	{{{cost}}}
ದನಿ	{{{owner}}}
ನಿರ್ವಾಹಕೆರ್	{{{operator}}}
Dam and spillways
ಅಣೆಕಟ್ಟ್‌ದ ಬಗೆ	{{{dam_type}}}
Impounds	{{{dam_crosses}}}
ಮುದೆಲ್‌ಡ್ದ್ ಎತ್ತರ(foundation)	{{{dam_height_foundation}}}
Height (thalweg)	{{{dam_height_thalweg}}}
ಉದ್ದ	{{{dam_length}}}
Elevation at crest	{{{dam_elevation_crest}}}
ಅಗೆಲ	{{{dam_width_crest}}}
Width (base)	{{{dam_width_base}}}
ಅಣೆಕಟ್ಟ್‌ದ ಪರಿಮಾಣ	{{{dam_volume}}}
Spillway	{{{spillway_count}}}
Spillway type	{{{spillway_type}}}
Spillway capacity	{{{spillway_capacity}}}
Reservoir
Creates	{{{res_name}}}
ಒಟ್ಟು ತಾಕತ್	{{{res_capacity_total}}}
Active capacity	{{{res_capacity_active}}}
Inactive capacity	{{{res_capacity_inactive}}}
Catchment area	{{{res_catchment}}}
Surface area	{{{res_surface}}}
Max. length	{{{res_max_length}}}
Max. width	{{{res_max_width}}}
Max. water depth	{{{res_max_depth}}}
Normal elevation	{{{res_elevation}}}
Tidal range	{{{res_tidal_range}}}
Power station
ಪುದರ್	{{{plant_name}}}
Coordinates	0°N 0°E / 0; 0
ನಿರ್ವಾಹಕೆರ್	{{{plant_operator}}}
ಸುರು ಆಯಿನ ತಾರೀಕ್	{{{plant_commission}}}
ಉಂತಾಯಿನ ತಾರೀಕ್	{{{plant_decommission}}}
Type	{{{plant_type}}}
Hydraulic head	{{{plant_hydraulic_head}}}
Turbines	{{{plant_turbines}}}
Installed capacity	{{{plant_capacity}}}
Annual generation	{{{plant_annual_gen}}}
Website {{{website}}}
{{{extra}}}

{{Infobox dam
| name                                 = 
| name_official                        = 
| image                                = 
| image_size                           = 
| image_caption                        = 
| image_alt                            = 
| location_map                         = 
| location_map_size                    = 
| location_map_caption                 = 
| location_map_alt                     = 
| mapframe = <!-- "yes" to show an interactive map -->
| coordinates                          = <!-- {{coord|..|..|type:landmark|display=inline,title}}-->
| country                              = 
| location                             = 
| purpose                              = 
| status                               = 
| construction_began                   = 
| opening                              = 
| demolished                           = 
| cost                                 = 
| builder                              = 
| designed_by                          = 
| owner                                = 
| operator                             = 
| dam_type                             = 
| dam_crosses                          = 
| dam_height_foundation                = 
| dam_height_thalweg                   = 
| dam_length                           = 
| dam_elevation_crest                  = 
| dam_width_crest                      = 
| dam_width_base                       = 
| dam_volume                           = 
| spillway_count                       = 
| spillway_type                        = 
| spillway_length                      = 
| spillway_capacity                    = 
| spillway_volumetric_flow_rate        = 
| spillway_type2                       = 
| spillway_length2                     = 
| spillway_capacity2                   = 
| spillway_volumetric_flow_rate2       = 
| spillway_type3                       = 
| spillway_length3                     = 
| spillway_capacity3                   = 
| spillway_volumetric_flow_rate3       = 
| res_name                             = 
| res_capacity_total                   = 
| res_capacity_active                  = 
| res_capacity_inactive                = 
| res_catchment                        = 
| res_surface                          = 
| res_max_length                       = 
| res_max_width                        = 
| res_max_depth                        = 
| res_elevation                        = 
| res_tidal_range                      = 
| lower_dam_type                       = 
| lower_dam_crosses                    = 
| lower_dam_height_foundation          = 
| lower_dam_height_thalweg             = 
| lower_dam_length                     = 
| lower_dam_elevation_crest            = 
| lower_dam_width_crest                = 
| lower_dam_width_base                 = 
| lower_dam_volume                     = 
| lower_spillway_count                 = 
| lower_spillway_type                  = 
| lower_spillway_length                = 
| lower_spillway_capacity              = 
| lower_spillway_volumetric_flow_rate  = 
| lower_spillway_type2                 = 
| lower_spillway_length2               = 
| lower_spillway_capacity2             = 
| lower_spillway_volumetric_flow_rate2 = 
| lower_spillway_type3                 = 
| lower_spillway_length3               = 
| lower_spillway_capacity3             = 
| lower_spillway_volumetric_flow_rate3 = 
| lower_res_name                       = 
| lower_res_capacity_total             = 
| lower_res_capacity_active            = 
| lower_res_capacity_inactive          = 
| lower_res_catchment                  = 
| lower_res_surface                    = 
| lower_res_max_length                 = 
| lower_res_max_width                  = 
| lower_res_max_depth                  = 
| lower_res_elevation                  = 
| lower_res_tidal_range                = 
| plant_name                           = 
| plant_coordinates                    = <!-- {{coord|..|..|type:landmark|display=inline}}-->
| plant_operator                       = 
| plant_commission                     = 
| plant_decommission                   = 
| plant_type                           = 
| plant_hydraulic_head                 = 
| plant_turbines                       = 
| plant_pumpgenerators                 = 
| plant_pumps                          = 
| plant_capacity                       = 
| plant_capacity_factor                = 
| plant_efficiency                     = 
| plant_storage_hours                  = 
| plant_annual_gen                     = 
| plant_annual_gen_year                = 
| website                              = 
| extra                                = 
}}

Parameter names and descriptions

Parameter name	Description
name	Name of dam.
name_official	Official name, if different from name. Preferably in native language.
image	Image filename, without File: parameter. Animated (.gif) and media files (.ogv) are also allowed. If empty, then the image from the Wikidata item is used.
image_size	Value to overrides the default 250px.
image_caption	Caption beneath image.
image_alt	Alternative text for image.
location_map	Name of a location map file. The coordinates must be specified as well (see below).
location_map_size	Value to overrides the default 250px.
location_map_caption	Caption beneath location map.
location_map_alt	Alternative text for location map.
coordinates	Geographic coordinates using {{coord}}. See here for more details. Remember to avoid being overly precise.
country	Country where the facility is located. Do not use flag icons.
location	General area where located. Avoid being overly-detailed.
purpose	Purpose of the dam(s). Common reasons are power, irrigation, flood control, navigation. If there are several purposes, consider using: Multi-purpose. Field codes: F=Flood control, I=Irrigation, N=Navigation, P=Power, W=Water supply.
status	Current status of the project. Enter any one of the following auto-expanding fields: D=Decommissioned, O=Operational, P=Proposed, UC=Under construction.
construction_began	Date construction began, consider using {{Start date}}.
opening	Date, or future date, of inauguration. Consider using {{Start date}}.
demolished	Date of demolition (i.e. removal or destruction of dam). Consider using {{End date}}.
cost	Total cost of development.
builder	Builder(s) of the dam.
owner	Owner(s) of the dam. Consider limiting to the top two, and include ownership percentage if possible. Example: Owner1: 60% <br/>Owner2: 40%
designed_by	Designers of the dam.
operator	Operator(s) of the dam. Only use this parameter if it is different from the owner(s) of the dam.
DAM AND SPILLWAYS
dam_type	Type of dam. Enter any one of the following auto-expanding fields: A=Arch dam, B=Barrage, E=Embankment dam, F=Earth-fill dam, G=Gravity dam, H=Rock-fill dam,AG=Arch-gravity dam.
dam_crosses	Body of river or stream below dam
dam_height	Height of dam. Deprecated parameter; use only if dam_height_foundation or dam_height_thalweg is not known.
dam_height_foundation	Height over foundation bed, with metric conversions.
dam_height_thalweg	Height over thalweg (riverbed), with metric conversions.
dam_length	Length of dam crown, with metric conversions.
dam_elevation_crest	Height of the dam's crest above sea level, with metric conversions.
dam_width_crest	Width at crest of dam, with metric conversions.
dam_width_base	Width at base of dam, with metric conversions.
dam_volume	Volume of material in the dam structure.
spillway_count	Number of spillways.
spillway_type	Type of spillway.
spillway_length	Length of spillway.
spillway_capacity	Capacity of spillway.
spillway_volumetric_flow_rate	Spillway volumetric flow rate.
spillway_type2	Type of 2nd spillway.
spillway_length2	Length of 2nd spillway.
spillway_capacity2	Capacity of 2nd spillway.
spillway_volumetric_flow_rate2	2nd Spillway volumetric flow rate.
spillway_type3	Type of 3rd spillway.
spillway_length3	Length of 3rd spillway.
spillway_capacity3	Capacity of 3rd spillway.
spillway_volumetric_flow_rate3	3rd Spillway volumetric flow rate.
RESERVOIR
res_name	Name of upstream body of water, if different than "dam_crosses".
res_capacity_total	Capacity of reservoir, i.e. megalitres.
res_capacity_active	The active, live or useful capacity (storage) of the reservoir.
res_capacity_inactive	The inactive or dead capacity (storage) of the reservoir.
res_catchment	Area of catchment for reservoir.
res_surface	Surface area (top water level) of reservoir.
res_max_length	Length of the reservoir at normal levels, with metric conversions.
res_max_width	Maximum width of the reservoir at normal levels, perpendicular to length. With metric conversions.
res_max_depth	Maximum water depth of reservoir.
res_elevation	The reservoir's height above sea level at normal levels, with metric conversions.
res_tidal_range	Tidal range, if applicable.
POWER STATION
plant_name	Name of plant, if applicable.
plant_coordinates	Geographic coordinates of the power station using {{coord}}. See here for more details. Remember to avoid being overly precise.
plant_operator	Operator(s) of the hydroelectric power plant.
plant_commission	Power plant commissioning date. May be different than dam opening date.
plant_decommission	Power plant decommissioning date. May be different than dam closing date.
plant_type	Type of hydroelectric power station. Enter any one of the following auto-expanding fields: C=Conventional, P=Pumped-storage, R=Run-of-the-river, T=Tidal barrage.
plant_hydraulic_head	Hydraulic head at power station.
plant_turbines	Number of turbines, with respective rated capacity. Exclude any reversible turbine-generators (pump/generators) and pumps from this — it should only contain conventional generation-only turbines.
plant_pumpgenerators	Number of reversible pump–generators, with respective rated capacity. For pumped storage plants only.
plant_pumps	Number of pumps, with respective rated capacity. For pumped storage plants only.
plant_capacity	Current installed capacity, or planned capacity for those under development. For plants which are operational, but have additional capacity under development, please use only the current installed capacity. MW suffix will be auto added to a number without unit or any text appended.
plant_capacity_factor	Capacity factor of the power station, in percentage. For pumped storage, please try to rely solely on third-party sources, as manual capacity factor calculations are overly complex for PSH and their results do not align with figures in (authoritative) third-party sources.
plant_efficiency	Overall efficiency of the power station, in percentage. Generally only applicable to pumped storage.
plant_storage_hours	Storage capacity of the power station, in hours (if desired, you can also provide calculated or actual GWh figures in parenthesis). Generally only applicable to pumped storage.
plant_annual_gen	Average annual power generation. To be used in combination with the following plant_annual_gen_year parameter. GW·h suffix will be auto added to a number without unit or any text appended.
plant_annual_gen_year	Given generation value exact description. If no description is given, it will default to Annual (i.e. it will expand to Annual generation). Enter following text: Planned net if given data is a planned estimate net output Planned gross if given data is a planned estimate gross output YYYY net, if given data is year YYYY net output YYYY gross if given data is year YYYY gross output Annual net if given data is a average net output Annual gross if given data is a average gross output
website	Raw wikitext for entering website(s). Use [brackets] where appropriate
extras	Free form, spans both columns. Use sparingly.

The coordinates should be specified using coordinates – with a {{coord}} template. See Wikipedia:WikiProject Geographical coordinates#Parameters for more details about setting the coordinates_type.

Mapframe maps

• Basic {{Infobox mapframe}} parameters:
  • mapframe – Specify yes or no to show or hide the map, overriding the default. Default: no, but also modified by onByDefault
    • Internal onByDefault parameter: yes, unless |location_map= is set
  • mapframe-coordinates or mapframe-coord or coordinates or coord – Coordinates to use, instead of any on Wikidata. Use the {{Coord}} template, e.g. |coord={{Coord|12.34|N|56.78|E}}. Default: coordinates from Wikidata d:Property:P625
  • mapframe-caption – Caption for the map. Default: blank (or if |mapframe-geomask= is set, "Location in geomask's label")
  • mapframe-custom – Use a custom map instead of the automatic mapframe. Specify either a {{maplink}} template, or another template that generates a mapframe map, or an image name. If used, most mapframe parameters will be ignored. Default: not specified
  • mapframe-id or id or qid – Id (Q-number) of Wikidata item to use. Default: item for current page
  • mapframe-wikidata – Set to yes to show all shape/line features from OpenStreetMap. Default: not specified
• Customise which features are displayed:
  • mapframe-point – Turn off display of point feature by setting to none. Force point marker to be displayed by setting to on. Default: not specified
  • mapframe-shape – Turn off display of shape feature by setting to none. Force display of shape by setting to on. Use an inverse shape (geomask) instead of a regular shape by setting to inverse. Default: not specified
  • mapframe-line – Turn off display of line feature by setting to none. Force display of line by setting to on. Default: not specified
  • mapframe-geomask – Wikidata item to use as a geomask (everything outside the boundary is shaded darker). Can either be a specific Wikidata item (Q-number), or a property that specifies the item to use (e.g. P17 for ದೇಶ (P17), P131 for ಆಡಳಿತ ಪ್ರಾದೇಶಿಕ ಘಟಕಲೆಡ್ ಉಂಡು (P131)). Default: not specified
  • mapframe-switcher – set to auto or geomasks or zooms to enable Template:Switcher-style switching between multiple mapframes. Default: not specified
    • auto – switch geomasks found in ಸ್ಥಳ (P276) and ಆಡಳಿತ ಪ್ರಾದೇಶಿಕ ಘಟಕಲೆಡ್ ಉಂಡು (P131) statements on the page's Wikidata item, searching recursively. E.g. an item's city, that city's state, and that state's country.
    • geomasks – switch between the geomasks specified as a comma-separated list of Wikidata items (Q-numbers) in the mapframe-geomask parameter
    • zooms – switch between "zoomed in"/"zoomed midway"/"zoomed out", where "zoomed in" is the default zoom (with a minimum of 3), "zoomed out" is 1, and "zoomed midway" is the average
• Other optional parameters:
  • mapframe-frame-width or mapframe-width – Frame width. Default: 270
  • mapframe-frame-height or mapframe-height – Frame height. Default: 200
  • mapframe-shape-fill – Color used to fill shape features. Default: #606060
  • mapframe-shape-fill-opacity – Opacity level of shape fill, a number between 0 and 1. Default: 0.1
  • mapframe-stroke-color or mapframe-stroke-colour – Color of line features, and outlines of shape features. Default: #ff0000
    • mapframe-line-stroke-color or mapframe-line-stroke-colour – Color of line features. Default: #ff0000
    • mapframe-shape-stroke-color or mapframe-shape-stroke-colour – Color of outlines of shape features. Default: #ff0000
  • mapframe-stroke-width – Width of line features, and outlines of shape features. Default: 2
    • mapframe-shape-stroke-width – Width of outlines of shape features. Default: 2
    • mapframe-line-stroke-width – Width of line features. Default: 5
  • mapframe-marker – Marker symbol to use for coordinates; see mw:Help:Extension:Kartographer/Icons for options. Default: not specified (i.e. blank)
    • Can also be set to blank to override any default marker symbol
  • mapframe-marker-color or mapframe-marker-colour – Background color for the marker. Default: #5E74F3
  • mapframe-geomask-stroke-color or mapframe-geomask-stroke-colour – Color of outline of geomask shape. Default: #555555
  • mapframe-geomask-stroke-width – Width of outline of geomask shape. Default: 1
  • mapframe-geomask-fill – Color used to fill outside geomask features. Default: #606060
  • mapframe-geomask-fill-opacity – Opacity level of fill outside geomask features, a number between 0 and 1. Default: 0.25
  • mapframe-zoom – Set the zoom level, from "1" (map of earth) to "18" (maximum zoom in), to be used if the zoom level cannot be determined automatically from object length or area. Default: 10
  • mapframe-length_km or mapframe-length_mi or mapframe-area_km2 or mapframe-area_mi2 – Determine zoom level by passing in object's length (in kilometres or miles) or area (in square kilometres or square miles). Default: not specified / not specified / not specified / not specified
  • mapframe-frame-coordinates or mapframe-frame-coord – Alternate latitude and longitude coordinates for initial placement of map, using {{coord}}. Default: derived from item coordinates
  • mapframe-type – Set the type of the object, with the same usage as {{coord}}. Default: not specified
  • mapframe-population – Set the population, useful with type="city", for {{Infobox dim}}. Default: not specified

Microformat

The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

Sub-templates

If the place or venue has "established", "founded", "opened" or similar dates, use {{start date}} for the earliest of those dates unless the date is before 1583 CE.

If it has a URL, use {{URL}}.

Please do not remove instances of these sub-templates.

Classes

hCard uses HTML classes including:

• adr
• agent
• category
• county-name
• extended-address
• fn
• label
• locality
• nickname
• note
• org
• region
• street-address
• uid
• url
• vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

• geo
• latitude
• longitude

Please do not rename or remove these classes nor collapse nested elements which use them.

Precision

When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter.

Tracking category

• Category:Pages using infobox dam with unknown parameters (೦)

The above documentation is transcluded from ಟೆಂಪ್ಲೇಟ್:Infobox dam/doc. (edit | history)
Editors can experiment in this template's sandbox (create | mirror) and testcases (create) pages.
Add categories to the /doc subpage. Subpages of this template.